Lithium-ion Battery Does Not Need To Activate The Battery Correctly For A Long Time

- Oct 11, 2019-

Lithium-ion batteries don't need to activate the battery properly for a long time? Generally, before the lithium-ion battery is shipped from the factory, the manufacturer performs activation processing and pre-charges, so the battery has residual power and can be used directly. Use the battery that has not been used for a long time, first discharge the battery until the appliance is automatically turned off, then turn off the power and then use it to automatically shut down. This cycle can basically make the battery return to the active state.

Lithium-ion batteries don't need to activate the battery properly for a long time?

Lithium batteries need to be activated, but this is something the lithium battery factory has to do, not what the user has to do. The lithium battery is easy to activate, as long as the battery is activated after 3-5 normal charge and discharge cycles, normal capacity is restored. The process of activating a lithium-ion battery that has not been used for a long time is as follows:

One: The lithium battery that has just been used generally has the remaining charge. Do not charge at this time. Put the battery into the product for normal use until the battery is so low that it will not turn on at all.

Second: the first charge, it is best to use the original charger to charge, and the shutdown charge is better, many people for convenience of use, do not shut down charge, this is not conducive to activate lithium battery capacity. And remind everyone that it is necessary to charge continuously for more than 12 hours and less than 15 hours. If the prompt is already full during the period, don't take it out and keep it charged!

Three: After the first full charge, if it is used normally, it will not be able to boot. You can continue to press the second step!

Four: Complete discharge, full charge (ie repeat process 2 and process 3) repeated three times. At this time, the battery is activated successfully to achieve the best capacity status.

Note: Lithium-ion batteries are often activated at the factory, so buyers are not required to activate again. It is recommended not to use the universal charger if the activation period. Now not all lithium battery protection boards need to be activated, but some protection ICs need to be activated, and this is the old IC solution. The old IC solution needs to do this in order to make the protection board not work to reduce static electricity. Discharge energy, so that the lithium battery is stored for a little longer.